// Copyright (c) 2000-2011 Bluespec, Inc.

// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:

// The above copyright notice and this permission notice shall be included in
// all copies or substantial portions of the Software.

// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
// THE SOFTWARE.
//
// $Revision$
// $Date$

`ifdef BSV_ASSIGNMENT_DELAY
`else
 `define BSV_ASSIGNMENT_DELAY
`endif

// Dual-Ported BRAM (WRITE FIRST) with byte enables
module BRAM2BE(CLKA,
               ENA,
               WEA,
               ADDRA,
               DIA,
               DOA,
               CLKB,
               ENB,
               WEB,
               ADDRB,
               DIB,
               DOB
              );

   parameter                      PIPELINED  = 0;
   parameter                      ADDR_WIDTH = 1;
   parameter                      DATA_WIDTH = 1;
   parameter                      CHUNKSIZE  = 1;
   parameter                      WE_WIDTH   = 1;
   parameter                      MEMSIZE    = 1;

   input                          CLKA;
   input                          ENA;
   input [WE_WIDTH-1:0]           WEA;
   input [ADDR_WIDTH-1:0]         ADDRA;
   input [DATA_WIDTH-1:0]         DIA;
   output [DATA_WIDTH-1:0]        DOA;

   input                          CLKB;
   input                          ENB;
   input [WE_WIDTH-1:0]           WEB;
   input [ADDR_WIDTH-1:0]         ADDRB;
   input [DATA_WIDTH-1:0]         DIB;
   output [DATA_WIDTH-1:0]        DOB;

   reg [DATA_WIDTH-1:0]           RAM[0:MEMSIZE-1] /* synthesis syn_ramstyle="no_rw_check" */ ;
   reg [DATA_WIDTH-1:0]           DOA_R;
   reg [DATA_WIDTH-1:0]           DOA_R2;
   reg [DATA_WIDTH-1:0]           DOB_R;
   reg [DATA_WIDTH-1:0]           DOB_R2;

`ifdef BSV_NO_INITIAL_BLOCKS
`else
   // synopsys translate_off
   integer                        i;
   initial
   begin : init_block
      for (i = 0; i < MEMSIZE; i = i + 1) begin
         RAM[i] = { ((DATA_WIDTH+1)/2) { 2'b10 } };
      end
      DOA_R  = { ((DATA_WIDTH+1)/2) { 2'b10 } };
      DOA_R2 = { ((DATA_WIDTH+1)/2) { 2'b10 } };
      DOB_R  = { ((DATA_WIDTH+1)/2) { 2'b10 } };
      DOB_R2 = { ((DATA_WIDTH+1)/2) { 2'b10 } };
   end
   // synopsys translate_on
`endif // !`ifdef BSV_NO_INITIAL_BLOCKS

   // PORT A

   // iverilog does not support the full verilog-2001 language.  This fixes that for simulation.
`ifdef __ICARUS__
   reg [DATA_WIDTH-1:0]  MASKA, IMASKA;
   reg  [DATA_WIDTH-1:0] DATA_A;
   wire [DATA_WIDTH-1:0] DATA_Awr;

   assign DATA_Awr = RAM[ADDRA];

   always @(WEA or DIA or DATA_Awr) begin : combo1
      integer j;
      MASKA  = 0;
      IMASKA = 0;

      for(j = WE_WIDTH-1; j >= 0; j = j - 1) begin
         if (WEA[j]) MASKA = (MASKA << 8) | { { DATA_WIDTH-CHUNKSIZE { 1'b0 } }, { CHUNKSIZE { 1'b1 } } };
         else        MASKA = (MASKA << 8);
      end
      IMASKA = ~MASKA;

      DATA_A = (DATA_Awr & IMASKA) | (DIA & MASKA);
   end

   always @(posedge CLKA) begin
      if (ENA) begin
         if (WEA) begin
            RAM[ADDRA] <= `BSV_ASSIGNMENT_DELAY DATA_A;
            DOA_R      <= `BSV_ASSIGNMENT_DELAY DATA_A;
         end
         else begin
            DOA_R      <= `BSV_ASSIGNMENT_DELAY RAM[ADDRA];
         end
      end
   end
`else
   generate
      genvar j;
      for(j = 0; j < WE_WIDTH; j = j + 1) begin: porta_we
         always @(posedge CLKA) begin
            if (ENA) begin
               if (WEA[j]) begin
                  RAM[ADDRA][((j+1)*CHUNKSIZE)-1 : j*CHUNKSIZE] <= `BSV_ASSIGNMENT_DELAY DIA[((j+1)*CHUNKSIZE)-1 : j*CHUNKSIZE];
                  DOA_R[((j+1)*CHUNKSIZE)-1 : j*CHUNKSIZE]      <= `BSV_ASSIGNMENT_DELAY DIA[((j+1)*CHUNKSIZE)-1 : j*CHUNKSIZE];
               end
               else begin
                  DOA_R[((j+1)*CHUNKSIZE)-1 : j*CHUNKSIZE]      <= `BSV_ASSIGNMENT_DELAY RAM[ADDRA][((j+1)*CHUNKSIZE)-1 : j*CHUNKSIZE];
               end
            end
         end
      end
   endgenerate
`endif // !`ifdef __ICARUS__


   // PORT B

   // iverilog does not support the full verilog-2001 language.  This fixes that for simulation.
`ifdef __ICARUS__
   reg [DATA_WIDTH-1:0]  MASKB, IMASKB;
   reg  [DATA_WIDTH-1:0] DATA_B;
   wire [DATA_WIDTH-1:0] DATA_Bwr;

   assign DATA_Bwr = RAM[ADDRB];

   always @(WEB or DIB or DATA_Bwr) begin : combo2
      integer j;
      MASKB  = 0;
      IMASKB = 0;

      for(j = WE_WIDTH-1; j >= 0; j = j - 1) begin
         if (WEB[j]) MASKB = (MASKB << 8) | { { DATA_WIDTH-CHUNKSIZE { 1'b0 } }, { CHUNKSIZE { 1'b1 } } };
         else        MASKB = (MASKB << 8);
      end
      IMASKB = ~MASKB;

      DATA_B = (DATA_Bwr & IMASKB) | (DIB & MASKB);
   end

   always @(posedge CLKB) begin
      if (ENB) begin
         if (WEB) begin
            RAM[ADDRB] <= `BSV_ASSIGNMENT_DELAY DATA_B;
            DOB_R      <= `BSV_ASSIGNMENT_DELAY DATA_B;
         end
         else begin
            DOB_R      <= `BSV_ASSIGNMENT_DELAY RAM[ADDRB];
         end
      end
   end
`else
   generate
      genvar k;
      for(k = 0; k < WE_WIDTH; k = k + 1) begin: portb_we
         always @(posedge CLKB) begin
            if (ENB) begin
               if (WEB[k]) begin
                  RAM[ADDRB][((k+1)*CHUNKSIZE)-1 : k*CHUNKSIZE] <= `BSV_ASSIGNMENT_DELAY DIB[((k+1)*CHUNKSIZE)-1 : k*CHUNKSIZE];
                  DOB_R[((k+1)*CHUNKSIZE)-1 : k*CHUNKSIZE]      <= `BSV_ASSIGNMENT_DELAY DIB[((k+1)*CHUNKSIZE)-1 : k*CHUNKSIZE];
               end
               else begin
                  DOB_R[((k+1)*CHUNKSIZE)-1 : k*CHUNKSIZE]      <= `BSV_ASSIGNMENT_DELAY RAM[ADDRB][((k+1)*CHUNKSIZE)-1 : k*CHUNKSIZE];
               end
            end
         end
      end
   endgenerate
`endif // !`ifdef __ICARUS__


   // Output drivers
   always @(posedge CLKA) begin
      DOA_R2 <= `BSV_ASSIGNMENT_DELAY DOA_R;
   end

   always @(posedge CLKB) begin
      DOB_R2 <= `BSV_ASSIGNMENT_DELAY DOB_R;
   end

   assign DOA = (PIPELINED) ? DOA_R2 : DOA_R;
   assign DOB = (PIPELINED) ? DOB_R2 : DOB_R;

endmodule // BRAM2BE