Console Output
+ cd Risco-5/fpga/nexys4_ddr
+ mkdir build
+ /eda/vivado/Vivado/2023.2/bin/vivado -mode batch -nolog -nojournal -source run.tcl
****** Vivado v2023.2 (64-bit)
**** SW Build 4029153 on Fri Oct 13 20:13:54 MDT 2023
**** IP Build 4028589 on Sat Oct 14 00:45:43 MDT 2023
**** SharedData Build 4025554 on Tue Oct 10 17:18:54 MDT 2023
** Copyright 1986-2022 Xilinx, Inc. All Rights Reserved.
** Copyright 2022-2023 Advanced Micro Devices, Inc. All Rights Reserved.
source run.tcl
# read_verilog "main.v"
read_verilog: Time (s): cpu = 00:00:08 ; elapsed = 00:00:11 . Memory (MB): peak = 1322.492 ; gain = 97.836 ; free physical = 10034 ; free virtual = 28662
# read_verilog ../../debug/reset.v
# read_verilog ../../src/core/alu_control.v
# read_verilog ../../src/core/alu.v
# read_verilog ../../src/core/control_unit.v
# read_verilog ../../src/core/core.v
# read_verilog ../../src/core/immediate_generator.v
# read_verilog ../../src/core/mux.v
# read_verilog ../../src/core/pc.v
# read_verilog ../../src/core/registers.v
# read_verilog ../../src/core/csr_unit.v
# read_verilog ../../src/peripheral/bus.v
# read_verilog ../../src/peripheral/gpio.v
# read_verilog ../../src/peripheral/gpios.v
# read_verilog ../../src/peripheral/leds.v
# read_verilog ../../src/peripheral/memory.v
# read_verilog ../../src/peripheral/soc.v
# read_verilog ../../src/peripheral/uart_rx.v
# read_verilog ../../src/peripheral/uart_tx.v
# read_verilog ../../src/peripheral/uart.v
# read_verilog ../../src/peripheral/fifo.v
# read_xdc "digilent_nexys4_ddr.xdc"
# set_property PROCESSING_ORDER EARLY [get_files digilent_nexys4_ddr.xdc]
# synth_design -top "top" -part "xc7a100tcsg324-1"
Command: synth_design -top top -part xc7a100tcsg324-1
Starting synth_design
Attempting to get a license for feature 'Synthesis' and/or device 'xc7a100t'
INFO: [Common 17-349] Got license for feature 'Synthesis' and/or device 'xc7a100t'
INFO: [Device 21-403] Loading part xc7a100tcsg324-1
INFO: [Synth 8-7079] Multithreading enabled for synth_design using a maximum of 4 processes.
INFO: [Synth 8-7078] Launching helper process for spawning children vivado processes
INFO: [Synth 8-7075] Helper process launched with PID 345875
---------------------------------------------------------------------------------
Starting RTL Elaboration : Time (s): cpu = 00:00:04 ; elapsed = 00:00:05 . Memory (MB): peak = 2076.215 ; gain = 403.746 ; free physical = 9143 ; free virtual = 27843
---------------------------------------------------------------------------------
INFO: [Synth 8-11241] undeclared symbol 'pc_source', assumed default net type 'wire' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/core.v:142]
WARNING: [Synth 8-11065] parameter 'SET_DIRECTION' becomes localparam in 'GPIOS' with formal parameter declaration list [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/gpios.v:19]
WARNING: [Synth 8-11065] parameter 'READ' becomes localparam in 'GPIOS' with formal parameter declaration list [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/gpios.v:20]
WARNING: [Synth 8-9400] empty statement in sequential block [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/memory.v:54]
INFO: [Synth 8-6157] synthesizing module 'top' [/var/lib/jenkins/workspace/Risco_5/Risco-5/fpga/nexys4_ddr/main.v:1]
INFO: [Synth 8-6157] synthesizing module 'ResetBootSystem' [/var/lib/jenkins/workspace/Risco_5/Risco-5/debug/reset.v:1]
Parameter CYCLES bound to: 20 - type: integer
INFO: [Synth 8-6155] done synthesizing module 'ResetBootSystem' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/debug/reset.v:1]
WARNING: [Synth 8-7071] port 'resetn_o' of module 'ResetBootSystem' is unconnected for instance 'ResetBootSystem' [/var/lib/jenkins/workspace/Risco_5/Risco-5/fpga/nexys4_ddr/main.v:24]
WARNING: [Synth 8-7023] instance 'ResetBootSystem' of module 'ResetBootSystem' has 3 connections declared, but only 2 given [/var/lib/jenkins/workspace/Risco_5/Risco-5/fpga/nexys4_ddr/main.v:24]
INFO: [Synth 8-6157] synthesizing module 'Risco_5_SOC' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/soc.v:1]
Parameter CLOCK_FREQ bound to: 50000000 - type: integer
Parameter BIT_RATE bound to: 115200 - type: integer
Parameter MEMORY_SIZE bound to: 2048 - type: integer
Parameter MEMORY_FILE bound to: ../../software/memory/teste_uart_fpga.hex - type: string
Parameter GPIO_WIDHT bound to: 8 - type: integer
Parameter UART_BUFFER_SIZE bound to: 16 - type: integer
INFO: [Synth 8-6157] synthesizing module 'Core' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/core.v:1]
Parameter BOOT_ADDRESS bound to: 0 - type: integer
INFO: [Synth 8-6157] synthesizing module 'PC' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/pc.v:1]
INFO: [Synth 8-6155] done synthesizing module 'PC' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/pc.v:1]
INFO: [Synth 8-6157] synthesizing module 'MUX' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/mux.v:1]
INFO: [Synth 8-6155] done synthesizing module 'MUX' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/mux.v:1]
INFO: [Synth 8-6157] synthesizing module 'Registers' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/registers.v:1]
INFO: [Synth 8-6155] done synthesizing module 'Registers' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/registers.v:1]
INFO: [Synth 8-6157] synthesizing module 'Control_Unit' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/control_unit.v:1]
INFO: [Synth 8-155] case statement is not full and has no default [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/control_unit.v:156]
INFO: [Synth 8-155] case statement is not full and has no default [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/control_unit.v:332]
INFO: [Synth 8-6155] done synthesizing module 'Control_Unit' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/control_unit.v:1]
INFO: [Synth 8-6157] synthesizing module 'ALU_Control' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/alu_control.v:1]
INFO: [Synth 8-226] default block is never used [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/alu_control.v:33]
INFO: [Synth 8-155] case statement is not full and has no default [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/alu_control.v:10]
INFO: [Synth 8-6155] done synthesizing module 'ALU_Control' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/alu_control.v:1]
INFO: [Synth 8-6157] synthesizing module 'Alu' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/alu.v:1]
INFO: [Synth 8-6155] done synthesizing module 'Alu' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/alu.v:1]
INFO: [Synth 8-6157] synthesizing module 'Immediate_Generator' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/immediate_generator.v:1]
INFO: [Synth 8-6155] done synthesizing module 'Immediate_Generator' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/immediate_generator.v:1]
INFO: [Synth 8-6157] synthesizing module 'CSR_Unit' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/csr_unit.v:1]
INFO: [Synth 8-155] case statement is not full and has no default [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/csr_unit.v:117]
INFO: [Synth 8-6155] done synthesizing module 'CSR_Unit' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/csr_unit.v:1]
INFO: [Synth 8-6155] done synthesizing module 'Core' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/core.v:1]
WARNING: [Synth 8-7071] port 'halt' of module 'Core' is unconnected for instance 'Core' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/soc.v:33]
WARNING: [Synth 8-7071] port 'interruption_request_external' of module 'Core' is unconnected for instance 'Core' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/soc.v:33]
WARNING: [Synth 8-7071] port 'interruption_request_timer' of module 'Core' is unconnected for instance 'Core' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/soc.v:33]
WARNING: [Synth 8-7071] port 'interruption_request_software' of module 'Core' is unconnected for instance 'Core' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/soc.v:33]
WARNING: [Synth 8-7071] port 'interruption_request_fast' of module 'Core' is unconnected for instance 'Core' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/soc.v:33]
WARNING: [Synth 8-7023] instance 'Core' of module 'Core' has 14 connections declared, but only 9 given [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/soc.v:33]
INFO: [Synth 8-6157] synthesizing module 'Memory' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/memory.v:1]
Parameter MEMORY_FILE bound to: ../../software/memory/teste_uart_fpga.hex - type: string
Parameter MEMORY_SIZE bound to: 2048 - type: integer
INFO: [Synth 8-3876] $readmem data file '../../software/memory/teste_uart_fpga.hex' is read successfully [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/memory.v:35]
INFO: [Synth 8-6155] done synthesizing module 'Memory' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/memory.v:1]
INFO: [Synth 8-6157] synthesizing module 'BUS' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/bus.v:1]
INFO: [Synth 8-6155] done synthesizing module 'BUS' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/bus.v:1]
INFO: [Synth 8-6157] synthesizing module 'LEDs' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/leds.v:1]
INFO: [Synth 8-6155] done synthesizing module 'LEDs' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/leds.v:1]
INFO: [Synth 8-6157] synthesizing module 'UART' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/uart.v:1]
Parameter CLK_FREQ bound to: 50000000 - type: integer
Parameter BIT_RATE bound to: 115200 - type: integer
Parameter BUFFER_SIZE bound to: 16 - type: integer
INFO: [Synth 8-6157] synthesizing module 'FIFO' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/fifo.v:1]
Parameter DEPTH bound to: 16 - type: integer
Parameter WIDTH bound to: 8 - type: integer
INFO: [Synth 8-6155] done synthesizing module 'FIFO' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/fifo.v:1]
INFO: [Synth 8-6157] synthesizing module 'uart_tool_rx' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/uart_rx.v:10]
Parameter BIT_RATE bound to: 115200 - type: integer
Parameter CLK_HZ bound to: 50000000 - type: integer
Parameter PAYLOAD_BITS bound to: 8 - type: integer
INFO: [Synth 8-6155] done synthesizing module 'uart_tool_rx' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/uart_rx.v:10]
INFO: [Synth 8-6157] synthesizing module 'uart_tool_tx' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/uart_tx.v:10]
Parameter BIT_RATE bound to: 115200 - type: integer
Parameter CLK_HZ bound to: 50000000 - type: integer
Parameter PAYLOAD_BITS bound to: 8 - type: integer
INFO: [Synth 8-6155] done synthesizing module 'uart_tool_tx' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/uart_tx.v:10]
INFO: [Synth 8-6155] done synthesizing module 'UART' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/uart.v:1]
INFO: [Synth 8-6157] synthesizing module 'GPIOS' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/gpios.v:1]
Parameter WIDHT bound to: 8 - type: integer
INFO: [Synth 8-6157] synthesizing module 'GPIO' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/gpio.v:1]
INFO: [Synth 8-6155] done synthesizing module 'GPIO' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/gpio.v:1]
INFO: [Synth 8-6155] done synthesizing module 'GPIOS' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/gpios.v:1]
INFO: [Synth 8-6155] done synthesizing module 'Risco_5_SOC' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/soc.v:1]
INFO: [Synth 8-6155] done synthesizing module 'top' (0#1) [/var/lib/jenkins/workspace/Risco_5/Risco-5/fpga/nexys4_ddr/main.v:1]
WARNING: [Synth 8-6014] Unused sequential element tx_fifo_read_reg was removed. [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/peripheral/uart.v:160]
WARNING: [Synth 8-7129] Port address[31] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[30] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[29] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[28] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[27] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[26] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[25] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[24] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[23] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[22] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[21] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[20] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[19] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[18] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[17] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[16] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[15] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[14] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[13] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[12] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[11] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[10] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[9] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[8] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[7] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[6] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[5] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[4] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[3] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[1] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[0] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[31] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[30] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[29] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[28] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[27] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[26] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[25] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[24] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[23] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[22] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[21] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[20] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[19] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[18] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[17] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[16] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[15] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[14] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[13] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[12] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[11] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[10] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[9] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port write_data[8] in module GPIOS is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[31] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[30] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[29] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[28] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[27] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[26] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[25] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[24] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[23] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[22] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[21] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[20] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[19] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[18] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[17] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[16] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[15] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[14] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[13] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[12] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[11] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[10] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[9] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[8] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[7] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[6] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[5] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[1] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[0] in module UART is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[31] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[30] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[29] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[28] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[27] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[26] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[25] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[24] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[23] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[22] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[21] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[20] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[19] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[18] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[17] in module LEDs is either unconnected or has no load
WARNING: [Synth 8-7129] Port address[16] in module LEDs is either unconnected or has no load
INFO: [Common 17-14] Message 'Synth 8-7129' appears 100 times and further instances of the messages will be disabled. Use the Tcl command set_msg_config to change the current settings.
---------------------------------------------------------------------------------
Finished RTL Elaboration : Time (s): cpu = 00:00:06 ; elapsed = 00:00:07 . Memory (MB): peak = 2165.152 ; gain = 492.684 ; free physical = 9026 ; free virtual = 27729
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Handling Custom Attributes
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Handling Custom Attributes : Time (s): cpu = 00:00:06 ; elapsed = 00:00:07 . Memory (MB): peak = 2179.996 ; gain = 507.527 ; free physical = 9021 ; free virtual = 27724
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished RTL Optimization Phase 1 : Time (s): cpu = 00:00:06 ; elapsed = 00:00:07 . Memory (MB): peak = 2179.996 ; gain = 507.527 ; free physical = 9021 ; free virtual = 27724
---------------------------------------------------------------------------------
Netlist sorting complete. Time (s): cpu = 00:00:00.04 ; elapsed = 00:00:00.04 . Memory (MB): peak = 2179.996 ; gain = 0.000 ; free physical = 9022 ; free virtual = 27725
INFO: [Project 1-570] Preparing netlist for logic optimization
Processing XDC Constraints
Initializing timing engine
Parsing XDC File [/var/lib/jenkins/workspace/Risco_5/Risco-5/fpga/nexys4_ddr/digilent_nexys4_ddr.xdc]
Finished Parsing XDC File [/var/lib/jenkins/workspace/Risco_5/Risco-5/fpga/nexys4_ddr/digilent_nexys4_ddr.xdc]
INFO: [Project 1-236] Implementation specific constraints were found while reading constraint file [/var/lib/jenkins/workspace/Risco_5/Risco-5/fpga/nexys4_ddr/digilent_nexys4_ddr.xdc]. These constraints will be ignored for synthesis but will be used in implementation. Impacted constraints are listed in the file [.Xil/top_propImpl.xdc].
Resolution: To avoid this warning, move constraints listed in [.Xil/top_propImpl.xdc] to another XDC file and exclude this new file from synthesis with the used_in_synthesis property (File Properties dialog in GUI) and re-run elaboration/synthesis.
Completed Processing XDC Constraints
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2327.746 ; gain = 0.000 ; free physical = 8977 ; free virtual = 27696
INFO: [Project 1-111] Unisim Transformation Summary:
No Unisim elements were transformed.
Constraint Validation Runtime : Time (s): cpu = 00:00:00.02 ; elapsed = 00:00:00.01 . Memory (MB): peak = 2327.781 ; gain = 0.000 ; free physical = 8980 ; free virtual = 27698
---------------------------------------------------------------------------------
Finished Constraint Validation : Time (s): cpu = 00:00:14 ; elapsed = 00:00:15 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8978 ; free virtual = 27697
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Loading Part and Timing Information
---------------------------------------------------------------------------------
Loading part: xc7a100tcsg324-1
---------------------------------------------------------------------------------
Finished Loading Part and Timing Information : Time (s): cpu = 00:00:14 ; elapsed = 00:00:15 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8978 ; free virtual = 27697
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Applying 'set_property' XDC Constraints
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished applying 'set_property' XDC Constraints : Time (s): cpu = 00:00:14 ; elapsed = 00:00:15 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8978 ; free virtual = 27697
---------------------------------------------------------------------------------
INFO: [Synth 8-802] inferred FSM for state register 'state_reg' in module 'ResetBootSystem'
INFO: [Synth 8-802] inferred FSM for state register 'state_reg' in module 'Control_Unit'
INFO: [Synth 8-802] inferred FSM for state register 'fsm_state_reg' in module 'uart_tool_rx'
INFO: [Synth 8-802] inferred FSM for state register 'fsm_state_reg' in module 'uart_tool_tx'
INFO: [Synth 8-802] inferred FSM for state register 'state_reg' in module 'UART'
---------------------------------------------------------------------------------------------------
State | New Encoding | Previous Encoding
---------------------------------------------------------------------------------------------------
RESET_COUNTER | 00 | 01
IDLE | 01 | 10
INIT | 10 | 00
---------------------------------------------------------------------------------------------------
INFO: [Synth 8-3354] encoded FSM with state register 'state_reg' using encoding 'sequential' in module 'ResetBootSystem'
---------------------------------------------------------------------------------------------------
State | New Encoding | Previous Encoding
---------------------------------------------------------------------------------------------------
FETCH | 00000000000000000000000000000000000000000000001 | 000000
VALIDATE_FETCH | 00000000000000000000000000000000000000000000010 | 101110
DECODE | 00000000000000000000000000000000000000000000100 | 000001
MEMADR | 00000000000000000000000000000000000000000001000 | 000010
MEMREAD_UNALIGNED | 00000000000000000000000000000000000000000010000 | 010110
LOAD_FIRST_BLOCK | 00000000000000000000000000000000000000000100000 | 010000
SAVE_FIRST_BLOCK | 00000000000000000000000000000000000000001000000 | 010001
CALC_NEXT_ADDRESS | 00000000000000000000000000000000000000010000000 | 010010
READ_SECOND_BLOCK | 00000000000000000000000000000000000000100000000 | 010011
LOAD_SECOND_BLOCK | 00000000000000000000000000000000000001000000000 | 010100
MERGE_BLOCKS | 00000000000000000000000000000000000010000000000 | 010101
FILTER_ALU_WB | 00000000000000000000000000000000000100000000000 | 010111
MEMREAD | 00000000000000000000000000000000001000000000000 | 000011
MEMWB | 00000000000000000000000000000000010000000000000 | 000100
MEMWRITE_UNALIGNED | 00000000000000000000000000000000100000000000000 | 011000
GEN_FIRST_BLOCK_PART_1 | 00000000000000000000000000000001000000000000000 | 011001
GEN_FIRST_BLOCK_PART_2 | 00000000000000000000000000000010000000000000000 | 011010
GEN_SECOND_BLOCK_PART_1 | 00000000000000000000000000000100000000000000000 | 011011
GEN_SECOND_BLOCK_PART_2 | 00000000000000000000000000001000000000000000000 | 011100
MERGE_WRITE_BLOCKS | 00000000000000000000000000010000000000000000000 | 011101
SWAP_VALUE_DIRECTION | 00000000000000000000000000100000000000000000000 | 011110
CLEAR_VALUE_HALF_BYTE_ONE_BLOCK | 00000000000000000000000001000000000000000000000 | 100010
CLEAR_VALUE_HALF_BYTE_ONE_BLOCK_2 | 00000000000000000000000010000000000000000000000 | 100011
CLEAR_VALUE_HALF_BYTE_ONE_BLOCK_3 | 00000000000000000000000100000000000000000000000 | 100100
CLEAR_VALUE | 00000000000000000000001000000000000000000000000 | 011111
MERGE_WRITE_VALUE_1 | 00000000000000000000010000000000000000000000000 | 100000
WRITE_VALUE_1 | 00000000000000000000100000000000000000000000000 | 100001
CALC_SECOND_BLOCK_ADDRESS_TO_WRITE | 00000000000000000001000000000000000000000000000 | 100101
READ_SECOND_BLOCK_TO_WRITE | 00000000000000000010000000000000000000000000000 | 100110
LOAD_SECOND_BLOCK_TO_WRITE | 00000000000000000100000000000000000000000000000 | 100111
LOAD_SECOND_BLOCK_TO_WRITE_2 | 00000000000000001000000000000000000000000000000 | 101000
SWAP_VALUE_DIRECTION_2 | 00000000000000010000000000000000000000000000000 | 101001
CLEAR_VALUE_PART_2 | 00000000000000100000000000000000000000000000000 | 101010
CLEAR_VALUE_PART_2_1 | 00000000000001000000000000000000000000000000000 | 101011
MERGE_WRITE_VALUE_2 | 00000000000010000000000000000000000000000000000 | 101100
WRITE_VALUE_2 | 00000000000100000000000000000000000000000000000 | 101101
MEMWRITE | 00000000001000000000000000000000000000000000000 | 000101
EXECUTER | 00000000010000000000000000000000000000000000000 | 000110
EXECUTEI | 00000000100000000000000000000000000000000000000 | 001000
JAL | 00000001000000000000000000000000000000000000000 | 001001
BRANCH | 00000010000000000000000000000000000000000000000 | 001010
AUIPC | 00000100000000000000000000000000000000000000000 | 001100
LUI | 00001000000000000000000000000000000000000000000 | 001101
JALR_PC | 00010000000000000000000000000000000000000000000 | 001110
JALR | 00100000000000000000000000000000000000000000000 | 001011
ALUWB | 01000000000000000000000000000000000000000000000 | 000111
EXECUTECSR | 10000000000000000000000000000000000000000000000 | 001111
---------------------------------------------------------------------------------------------------
INFO: [Synth 8-3354] encoded FSM with state register 'state_reg' using encoding 'one-hot' in module 'Control_Unit'
WARNING: [Synth 8-327] inferring latch for variable 'aluop_out_reg' [/var/lib/jenkins/workspace/Risco_5/Risco-5/src/core/alu_control.v:12]
---------------------------------------------------------------------------------------------------
State | New Encoding | Previous Encoding
---------------------------------------------------------------------------------------------------
FSM_IDLE | 00 | 000
FSM_START | 11 | 001
FSM_RECV | 10 | 010
FSM_STOP | 01 | 011
---------------------------------------------------------------------------------------------------
INFO: [Synth 8-3354] encoded FSM with state register 'fsm_state_reg' using encoding 'sequential' in module 'uart_tool_rx'
---------------------------------------------------------------------------------------------------
State | New Encoding | Previous Encoding
---------------------------------------------------------------------------------------------------
FSM_IDLE | 00 | 000
FSM_START | 11 | 001
FSM_SEND | 10 | 010
FSM_STOP | 01 | 011
---------------------------------------------------------------------------------------------------
INFO: [Synth 8-3354] encoded FSM with state register 'fsm_state_reg' using encoding 'sequential' in module 'uart_tool_tx'
---------------------------------------------------------------------------------------------------
State | New Encoding | Previous Encoding
---------------------------------------------------------------------------------------------------
IDLE | 0000 | 0000
COPY_WRITE_BUFFER | 0001 | 0100
WRITE | 0010 | 0010
READ | 0011 | 0001
READ_RX_FIFO_EMPTY | 0100 | 0110
READ_TX_FIFO_EMPTY | 0101 | 0111
READ_RX_FIFO_FULL | 0110 | 1000
READ_TX_FIFO_FULL | 0111 | 1001
WB | 1000 | 0101
FINISH | 1001 | 0011
---------------------------------------------------------------------------------------------------
INFO: [Synth 8-3354] encoded FSM with state register 'state_reg' using encoding 'sequential' in module 'UART'
---------------------------------------------------------------------------------
Finished RTL Optimization Phase 2 : Time (s): cpu = 00:00:15 ; elapsed = 00:00:17 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8978 ; free virtual = 27698
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start RTL Component Statistics
---------------------------------------------------------------------------------
Detailed RTL Component Info :
+---Adders :
2 Input 32 Bit Adders := 1
3 Input 32 Bit Adders := 1
2 Input 10 Bit Adders := 2
2 Input 6 Bit Adders := 6
2 Input 5 Bit Adders := 1
2 Input 4 Bit Adders := 2
2 Input 3 Bit Adders := 2
2 Input 2 Bit Adders := 1
+---XORs :
2 Input 32 Bit XORs := 1
+---XORs :
2 Bit Wide XORs := 1
+---Registers :
64 Bit Registers := 2
33 Bit Registers := 1
32 Bit Registers := 50
10 Bit Registers := 2
8 Bit Registers := 8
6 Bit Registers := 5
4 Bit Registers := 2
3 Bit Registers := 1
1 Bit Registers := 13
+---RAMs :
16K Bit (512 X 32 bit) RAMs := 1
128 Bit (16 X 8 bit) RAMs := 2
+---Muxes :
4 Input 64 Bit Muxes := 1
47 Input 47 Bit Muxes := 1
2 Input 47 Bit Muxes := 17
11 Input 47 Bit Muxes := 1
3 Input 33 Bit Muxes := 1
2 Input 32 Bit Muxes := 8
8 Input 32 Bit Muxes := 1
15 Input 32 Bit Muxes := 1
6 Input 32 Bit Muxes := 1
4 Input 32 Bit Muxes := 1
10 Input 32 Bit Muxes := 2
2 Input 8 Bit Muxes := 3
3 Input 6 Bit Muxes := 1
2 Input 6 Bit Muxes := 4
2 Input 5 Bit Muxes := 1
47 Input 4 Bit Muxes := 1
9 Input 4 Bit Muxes := 1
10 Input 4 Bit Muxes := 2
23 Input 4 Bit Muxes := 1
2 Input 4 Bit Muxes := 3
6 Input 4 Bit Muxes := 1
5 Input 3 Bit Muxes := 1
2 Input 3 Bit Muxes := 3
4 Input 3 Bit Muxes := 2
47 Input 3 Bit Muxes := 3
10 Input 3 Bit Muxes := 2
3 Input 2 Bit Muxes := 1
2 Input 2 Bit Muxes := 16
47 Input 2 Bit Muxes := 2
4 Input 2 Bit Muxes := 4
3 Input 1 Bit Muxes := 6
2 Input 1 Bit Muxes := 68
47 Input 1 Bit Muxes := 12
4 Input 1 Bit Muxes := 3
6 Input 1 Bit Muxes := 5
10 Input 1 Bit Muxes := 8
---------------------------------------------------------------------------------
Finished RTL Component Statistics
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Part Resource Summary
---------------------------------------------------------------------------------
Part Resources:
DSPs: 240 (col length:80)
BRAMs: 270 (col length: RAMB18 80 RAMB36 40)
---------------------------------------------------------------------------------
Finished Part Resource Summary
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Cross Boundary and Area Optimization
---------------------------------------------------------------------------------
WARNING: [Synth 8-7080] Parallel synthesis criteria is not met
INFO: [Synth 8-6851] RAM (SOC/Memory/memory_reg) has partial Byte Wide Write Enable pattern, however no output register found in fanout of RAM. Recommended to use supported Byte Wide Write Enable template.
---------------------------------------------------------------------------------
Finished Cross Boundary and Area Optimization : Time (s): cpu = 00:00:27 ; elapsed = 00:00:29 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8902 ; free virtual = 27632
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start ROM, RAM, DSP, Shift Register and Retiming Reporting
---------------------------------------------------------------------------------
Distributed RAM: Preliminary Mapping Report (see note below)
+------------+-----------------------------+-----------+----------------------+-----------------+
|Module Name | RTL Object | Inference | Size (Depth x Width) | Primitives |
+------------+-----------------------------+-----------+----------------------+-----------------+
|top | SOC/Memory/memory_reg | Implied | 512 x 32 | RAM256X1S x 64 |
|top | SOC/Uart/RX_FIFO/memory_reg | Implied | 16 x 8 | RAM32M x 2 |
|top | SOC/Uart/TX_FIFO/memory_reg | Implied | 16 x 8 | RAM32M x 2 |
+------------+-----------------------------+-----------+----------------------+-----------------+
Note: The table above is a preliminary report that shows the Distributed RAMs at the current stage of the synthesis flow. Some Distributed RAMs may be reimplemented as non Distributed RAM primitives later in the synthesis flow. Multiple instantiated RAMs are reported only once.
---------------------------------------------------------------------------------
Finished ROM, RAM, DSP, Shift Register and Retiming Reporting
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Applying XDC Timing Constraints
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Applying XDC Timing Constraints : Time (s): cpu = 00:00:32 ; elapsed = 00:00:33 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8888 ; free virtual = 27625
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Timing Optimization
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Timing Optimization : Time (s): cpu = 00:00:35 ; elapsed = 00:00:36 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8887 ; free virtual = 27624
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start ROM, RAM, DSP, Shift Register and Retiming Reporting
---------------------------------------------------------------------------------
Distributed RAM: Final Mapping Report
+------------+-----------------------------+-----------+----------------------+-----------------+
|Module Name | RTL Object | Inference | Size (Depth x Width) | Primitives |
+------------+-----------------------------+-----------+----------------------+-----------------+
|top | SOC/Memory/memory_reg | Implied | 512 x 32 | RAM256X1S x 64 |
|top | SOC/Uart/RX_FIFO/memory_reg | Implied | 16 x 8 | RAM32M x 2 |
|top | SOC/Uart/TX_FIFO/memory_reg | Implied | 16 x 8 | RAM32M x 2 |
+------------+-----------------------------+-----------+----------------------+-----------------+
---------------------------------------------------------------------------------
Finished ROM, RAM, DSP, Shift Register and Retiming Reporting
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Technology Mapping
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Technology Mapping : Time (s): cpu = 00:00:37 ; elapsed = 00:00:38 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8885 ; free virtual = 27622
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start IO Insertion
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Flattening Before IO Insertion
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Flattening Before IO Insertion
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Final Netlist Cleanup
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Final Netlist Cleanup
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished IO Insertion : Time (s): cpu = 00:00:41 ; elapsed = 00:00:43 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8884 ; free virtual = 27621
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Renaming Generated Instances
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Renaming Generated Instances : Time (s): cpu = 00:00:41 ; elapsed = 00:00:43 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8884 ; free virtual = 27621
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Rebuilding User Hierarchy
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Rebuilding User Hierarchy : Time (s): cpu = 00:00:41 ; elapsed = 00:00:43 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8878 ; free virtual = 27615
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Renaming Generated Ports
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Renaming Generated Ports : Time (s): cpu = 00:00:41 ; elapsed = 00:00:43 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8875 ; free virtual = 27612
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Handling Custom Attributes
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Handling Custom Attributes : Time (s): cpu = 00:00:41 ; elapsed = 00:00:43 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8877 ; free virtual = 27615
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Renaming Generated Nets
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Renaming Generated Nets : Time (s): cpu = 00:00:41 ; elapsed = 00:00:43 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8877 ; free virtual = 27615
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Writing Synthesis Report
---------------------------------------------------------------------------------
Report BlackBoxes:
+-+--------------+----------+
| |BlackBox name |Instances |
+-+--------------+----------+
+-+--------------+----------+
Report Cell Usage:
+------+----------+------+
| |Cell |Count |
+------+----------+------+
|1 |BUFG | 2|
|2 |CARRY4 | 39|
|3 |LUT1 | 13|
|4 |LUT2 | 185|
|5 |LUT3 | 247|
|6 |LUT4 | 237|
|7 |LUT5 | 300|
|8 |LUT6 | 1598|
|9 |MUXF7 | 431|
|10 |MUXF8 | 2|
|11 |RAM256X1S | 64|
|12 |RAM32M | 2|
|13 |RAM32X1D | 4|
|14 |FDRE | 1956|
|15 |FDSE | 4|
|16 |LD | 4|
|17 |IBUF | 3|
|18 |IOBUF | 8|
|19 |OBUF | 9|
+------+----------+------+
---------------------------------------------------------------------------------
Finished Writing Synthesis Report : Time (s): cpu = 00:00:41 ; elapsed = 00:00:43 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8877 ; free virtual = 27615
---------------------------------------------------------------------------------
Synthesis finished with 0 errors, 0 critical warnings and 62 warnings.
Synthesis Optimization Runtime : Time (s): cpu = 00:00:39 ; elapsed = 00:00:40 . Memory (MB): peak = 2327.781 ; gain = 507.527 ; free physical = 8878 ; free virtual = 27615
Synthesis Optimization Complete : Time (s): cpu = 00:00:41 ; elapsed = 00:00:43 . Memory (MB): peak = 2327.781 ; gain = 655.312 ; free physical = 8878 ; free virtual = 27615
INFO: [Project 1-571] Translating synthesized netlist
Netlist sorting complete. Time (s): cpu = 00:00:00.04 ; elapsed = 00:00:00.04 . Memory (MB): peak = 2327.781 ; gain = 0.000 ; free physical = 9152 ; free virtual = 27893
INFO: [Netlist 29-17] Analyzing 554 Unisim elements for replacement
INFO: [Netlist 29-28] Unisim Transformation completed in 0 CPU seconds
INFO: [Project 1-570] Preparing netlist for logic optimization
Parsing XDC File [/var/lib/jenkins/workspace/Risco_5/Risco-5/fpga/nexys4_ddr/digilent_nexys4_ddr.xdc]
Finished Parsing XDC File [/var/lib/jenkins/workspace/Risco_5/Risco-5/fpga/nexys4_ddr/digilent_nexys4_ddr.xdc]
INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s).
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2391.777 ; gain = 0.000 ; free physical = 9150 ; free virtual = 27891
INFO: [Project 1-111] Unisim Transformation Summary:
A total of 82 instances were transformed.
IOBUF => IOBUF (IBUF, OBUFT): 8 instances
LD => LDCE: 4 instances
RAM256X1S => RAM256X1S (MUXF7(x2), MUXF8, RAMS64E(x4)): 64 instances
RAM32M => RAM32M (RAMD32(x6), RAMS32(x2)): 2 instances
RAM32X1D => RAM32X1D (RAMD32(x2)): 4 instances
Synth Design complete | Checksum: 3e51092a
INFO: [Common 17-83] Releasing license: Synthesis
76 Infos, 114 Warnings, 0 Critical Warnings and 0 Errors encountered.
synth_design completed successfully
synth_design: Time (s): cpu = 00:00:51 ; elapsed = 00:00:52 . Memory (MB): peak = 2391.812 ; gain = 1069.320 ; free physical = 9145 ; free virtual = 27886
INFO: [Common 17-2834] synth_design peak Physical Memory [PSS] (MB): overall = 2025.597; main = 1742.217; forked = 424.702
INFO: [Common 17-2834] synth_design peak Virtual Memory [VSS] (MB): overall = 3297.402; main = 2391.781; forked = 969.652
# opt_design
Command: opt_design
Attempting to get a license for feature 'Implementation' and/or device 'xc7a100t'
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7a100t'
Running DRC as a precondition to command opt_design
Starting DRC Task
INFO: [DRC 23-27] Running DRC with 8 threads
INFO: [Project 1-461] DRC finished with 0 Errors
INFO: [Project 1-462] Please refer to the DRC report (report_drc) for more information.
Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.81 . Memory (MB): peak = 2455.809 ; gain = 63.996 ; free physical = 9141 ; free virtual = 27883
Starting Cache Timing Information Task
INFO: [Timing 38-35] Done setting XDC timing constraints.
Ending Cache Timing Information Task | Checksum: 17d66fb94
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 2568.621 ; gain = 112.812 ; free physical = 9055 ; free virtual = 27814
Starting Logic Optimization Task
Phase 1 Initialization
Phase 1.1 Core Generation And Design Setup
Phase 1.1 Core Generation And Design Setup | Checksum: 17d66fb94
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2817.527 ; gain = 0.000 ; free physical = 8794 ; free virtual = 27552
Phase 1.2 Setup Constraints And Sort Netlist
Phase 1.2 Setup Constraints And Sort Netlist | Checksum: 17d66fb94
Time (s): cpu = 00:00:00.01 ; elapsed = 00:00:00 . Memory (MB): peak = 2817.527 ; gain = 0.000 ; free physical = 8794 ; free virtual = 27552
Phase 1 Initialization | Checksum: 17d66fb94
Time (s): cpu = 00:00:00.01 ; elapsed = 00:00:00.01 . Memory (MB): peak = 2817.527 ; gain = 0.000 ; free physical = 8794 ; free virtual = 27552
Phase 2 Timer Update And Timing Data Collection
Phase 2.1 Timer Update
Phase 2.1 Timer Update | Checksum: 17d66fb94
Time (s): cpu = 00:00:00.2 ; elapsed = 00:00:00.07 . Memory (MB): peak = 2817.527 ; gain = 0.000 ; free physical = 8790 ; free virtual = 27549
Phase 2.2 Timing Data Collection
Phase 2.2 Timing Data Collection | Checksum: 17d66fb94
Time (s): cpu = 00:00:00.2 ; elapsed = 00:00:00.08 . Memory (MB): peak = 2817.527 ; gain = 0.000 ; free physical = 8790 ; free virtual = 27549
Phase 2 Timer Update And Timing Data Collection | Checksum: 17d66fb94
Time (s): cpu = 00:00:00.2 ; elapsed = 00:00:00.08 . Memory (MB): peak = 2817.527 ; gain = 0.000 ; free physical = 8790 ; free virtual = 27549
Phase 3 Retarget
INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s).
INFO: [Opt 31-49] Retargeted 0 cell(s).
Phase 3 Retarget | Checksum: 17d66fb94
Time (s): cpu = 00:00:00.28 ; elapsed = 00:00:00.15 . Memory (MB): peak = 2817.527 ; gain = 0.000 ; free physical = 8792 ; free virtual = 27551
Retarget | Checksum: 17d66fb94
INFO: [Opt 31-389] Phase Retarget created 0 cells and removed 0 cells
Phase 4 Constant propagation
INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s).
Phase 4 Constant propagation | Checksum: 17d66fb94
Time (s): cpu = 00:00:00.32 ; elapsed = 00:00:00.2 . Memory (MB): peak = 2817.527 ; gain = 0.000 ; free physical = 8792 ; free virtual = 27551
Constant propagation | Checksum: 17d66fb94
INFO: [Opt 31-389] Phase Constant propagation created 0 cells and removed 0 cells
Phase 5 Sweep
Phase 5 Sweep | Checksum: 148cfddca
Time (s): cpu = 00:00:00.36 ; elapsed = 00:00:00.24 . Memory (MB): peak = 2817.527 ; gain = 0.000 ; free physical = 8792 ; free virtual = 27551
Sweep | Checksum: 148cfddca
INFO: [Opt 31-389] Phase Sweep created 8 cells and removed 1 cells
Phase 6 BUFG optimization
Phase 6 BUFG optimization | Checksum: 148cfddca
Time (s): cpu = 00:00:00.47 ; elapsed = 00:00:00.29 . Memory (MB): peak = 2849.543 ; gain = 32.016 ; free physical = 8790 ; free virtual = 27549
BUFG optimization | Checksum: 148cfddca
INFO: [Opt 31-662] Phase BUFG optimization created 0 cells of which 0 are BUFGs and removed 0 cells.
Phase 7 Shift Register Optimization
INFO: [Opt 31-1064] SRL Remap converted 0 SRLs to 0 registers and converted 0 registers of register chains to 0 SRLs
Phase 7 Shift Register Optimization | Checksum: 148cfddca
Time (s): cpu = 00:00:00.47 ; elapsed = 00:00:00.3 . Memory (MB): peak = 2849.543 ; gain = 32.016 ; free physical = 8789 ; free virtual = 27548
Shift Register Optimization | Checksum: 148cfddca
INFO: [Opt 31-389] Phase Shift Register Optimization created 0 cells and removed 0 cells
Phase 8 Post Processing Netlist
Phase 8 Post Processing Netlist | Checksum: 233fcf466
Time (s): cpu = 00:00:00.49 ; elapsed = 00:00:00.31 . Memory (MB): peak = 2849.543 ; gain = 32.016 ; free physical = 8791 ; free virtual = 27550
Post Processing Netlist | Checksum: 233fcf466
INFO: [Opt 31-389] Phase Post Processing Netlist created 0 cells and removed 0 cells
Phase 9 Finalization
Phase 9.1 Finalizing Design Cores and Updating Shapes
Phase 9.1 Finalizing Design Cores and Updating Shapes | Checksum: 1065a0b3c
Time (s): cpu = 00:00:00.55 ; elapsed = 00:00:00.35 . Memory (MB): peak = 2849.543 ; gain = 32.016 ; free physical = 8786 ; free virtual = 27545
Phase 9.2 Verifying Netlist Connectivity
Starting Connectivity Check Task
Time (s): cpu = 00:00:00.01 ; elapsed = 00:00:00.01 . Memory (MB): peak = 2849.543 ; gain = 0.000 ; free physical = 8785 ; free virtual = 27544
Phase 9.2 Verifying Netlist Connectivity | Checksum: 1065a0b3c
Time (s): cpu = 00:00:00.56 ; elapsed = 00:00:00.36 . Memory (MB): peak = 2849.543 ; gain = 32.016 ; free physical = 8785 ; free virtual = 27543
Phase 9 Finalization | Checksum: 1065a0b3c
Time (s): cpu = 00:00:00.56 ; elapsed = 00:00:00.36 . Memory (MB): peak = 2849.543 ; gain = 32.016 ; free physical = 8785 ; free virtual = 27543
Opt_design Change Summary
=========================
-------------------------------------------------------------------------------------------------------------------------
| Phase | #Cells created | #Cells Removed | #Constrained objects preventing optimizations |
-------------------------------------------------------------------------------------------------------------------------
| Retarget | 0 | 0 | 0 |
| Constant propagation | 0 | 0 | 0 |
| Sweep | 8 | 1 | 0 |
| BUFG optimization | 0 | 0 | 0 |
| Shift Register Optimization | 0 | 0 | 0 |
| Post Processing Netlist | 0 | 0 | 0 |
-------------------------------------------------------------------------------------------------------------------------
Ending Logic Optimization Task | Checksum: 1065a0b3c
Time (s): cpu = 00:00:00.57 ; elapsed = 00:00:00.36 . Memory (MB): peak = 2849.543 ; gain = 32.016 ; free physical = 8785 ; free virtual = 27543
INFO: [Constraints 18-11670] Building netlist checker database with flags, 0x8
Done building netlist checker database: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.01 . Memory (MB): peak = 2849.543 ; gain = 0.000 ; free physical = 8784 ; free virtual = 27543
Starting Power Optimization Task
INFO: [Pwropt 34-132] Skipping clock gating for clocks with a period < 2.00 ns.
Ending Power Optimization Task | Checksum: 1065a0b3c
Time (s): cpu = 00:00:00.01 ; elapsed = 00:00:00.02 . Memory (MB): peak = 2849.543 ; gain = 0.000 ; free physical = 8784 ; free virtual = 27543
Starting Final Cleanup Task
Ending Final Cleanup Task | Checksum: 1065a0b3c
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2849.543 ; gain = 0.000 ; free physical = 8784 ; free virtual = 27543
Starting Netlist Obfuscation Task
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2849.543 ; gain = 0.000 ; free physical = 8784 ; free virtual = 27543
Ending Netlist Obfuscation Task | Checksum: 1065a0b3c
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2849.543 ; gain = 0.000 ; free physical = 8784 ; free virtual = 27543
INFO: [Common 17-83] Releasing license: Implementation
18 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered.
opt_design completed successfully
opt_design: Time (s): cpu = 00:00:06 ; elapsed = 00:00:06 . Memory (MB): peak = 2849.543 ; gain = 457.730 ; free physical = 8784 ; free virtual = 27543
# place_design
Command: place_design
Attempting to get a license for feature 'Implementation' and/or device 'xc7a100t'
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7a100t'
INFO: [Common 17-83] Releasing license: Implementation
INFO: [DRC 23-27] Running DRC with 8 threads
INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors
INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information.
Running DRC as a precondition to command place_design
INFO: [DRC 23-27] Running DRC with 8 threads
INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors
INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information.
INFO: [Place 30-611] Multithreading enabled for place_design using a maximum of 8 CPUs
Starting Placer Task
Phase 1 Placer Initialization
Phase 1.1 Placer Initialization Netlist Sorting
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2881.559 ; gain = 0.000 ; free physical = 8785 ; free virtual = 27545
Phase 1.1 Placer Initialization Netlist Sorting | Checksum: c0efab92
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.01 . Memory (MB): peak = 2881.559 ; gain = 0.000 ; free physical = 8785 ; free virtual = 27545
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2881.559 ; gain = 0.000 ; free physical = 8785 ; free virtual = 27545
Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device
INFO: [Timing 38-35] Done setting XDC timing constraints.
Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device | Checksum: 1168202fb
Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.76 . Memory (MB): peak = 2881.559 ; gain = 0.000 ; free physical = 8784 ; free virtual = 27548
Phase 1.3 Build Placer Netlist Model
Phase 1.3 Build Placer Netlist Model | Checksum: 208a4c0f6
Time (s): cpu = 00:00:04 ; elapsed = 00:00:02 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8784 ; free virtual = 27548
Phase 1.4 Constrain Clocks/Macros
Phase 1.4 Constrain Clocks/Macros | Checksum: 208a4c0f6
Time (s): cpu = 00:00:04 ; elapsed = 00:00:02 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8784 ; free virtual = 27548
Phase 1 Placer Initialization | Checksum: 208a4c0f6
Time (s): cpu = 00:00:04 ; elapsed = 00:00:02 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8784 ; free virtual = 27548
Phase 2 Global Placement
Phase 2.1 Floorplanning
Phase 2.1 Floorplanning | Checksum: 1de90280c
Time (s): cpu = 00:00:04 ; elapsed = 00:00:02 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8777 ; free virtual = 27542
Phase 2.2 Update Timing before SLR Path Opt
Phase 2.2 Update Timing before SLR Path Opt | Checksum: 2158f8a93
Time (s): cpu = 00:00:04 ; elapsed = 00:00:02 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8777 ; free virtual = 27542
Phase 2.3 Post-Processing in Floorplanning
Phase 2.3 Post-Processing in Floorplanning | Checksum: 2158f8a93
Time (s): cpu = 00:00:04 ; elapsed = 00:00:02 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8777 ; free virtual = 27542
Phase 2.4 Global Placement Core
Phase 2.4.1 UpdateTiming Before Physical Synthesis
Phase 2.4.1 UpdateTiming Before Physical Synthesis | Checksum: 1bd3086e3
Time (s): cpu = 00:00:15 ; elapsed = 00:00:04 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8756 ; free virtual = 27522
Phase 2.4.2 Physical Synthesis In Placer
INFO: [Physopt 32-1035] Found 0 LUTNM shape to break, 71 LUT instances to create LUTNM shape
INFO: [Physopt 32-1044] Break lutnm for timing: one critical 0, two critical 0, total 0, new lutff created 0
INFO: [Physopt 32-1138] End 1 Pass. Optimized 30 nets or LUTs. Breaked 0 LUT, combined 30 existing LUTs and moved 0 existing LUT
INFO: [Physopt 32-65] No nets found for high-fanout optimization.
INFO: [Physopt 32-232] Optimized 0 net. Created 0 new instance.
INFO: [Physopt 32-775] End 1 Pass. Optimized 0 net or cell. Created 0 new cell, deleted 0 existing cell and moved 0 existing cell
INFO: [Physopt 32-670] No setup violation found. DSP Register Optimization was not performed.
INFO: [Physopt 32-670] No setup violation found. Shift Register to Pipeline Optimization was not performed.
INFO: [Physopt 32-670] No setup violation found. Shift Register Optimization was not performed.
INFO: [Physopt 32-670] No setup violation found. BRAM Register Optimization was not performed.
INFO: [Physopt 32-670] No setup violation found. URAM Register Optimization was not performed.
INFO: [Physopt 32-949] No candidate nets found for dynamic/static region interface net replication
INFO: [Physopt 32-775] End 1 Pass. Optimized 0 net or cell. Created 0 new cell, deleted 0 existing cell and moved 0 existing cell
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8756 ; free virtual = 27524
Summary of Physical Synthesis Optimizations
============================================
-----------------------------------------------------------------------------------------------------------------------------------------------------------
| Optimization | Added Cells | Removed Cells | Optimized Cells/Nets | Dont Touch | Iterations | Elapsed |
-----------------------------------------------------------------------------------------------------------------------------------------------------------
| LUT Combining | 0 | 30 | 30 | 0 | 1 | 00:00:00 |
| Retime | 0 | 0 | 0 | 0 | 1 | 00:00:00 |
| Very High Fanout | 0 | 0 | 0 | 0 | 1 | 00:00:00 |
| DSP Register | 0 | 0 | 0 | 0 | 0 | 00:00:00 |
| Shift Register to Pipeline | 0 | 0 | 0 | 0 | 0 | 00:00:00 |
| Shift Register | 0 | 0 | 0 | 0 | 0 | 00:00:00 |
| BRAM Register | 0 | 0 | 0 | 0 | 0 | 00:00:00 |
| URAM Register | 0 | 0 | 0 | 0 | 0 | 00:00:00 |
| Dynamic/Static Region Interface Net Replication | 0 | 0 | 0 | 0 | 1 | 00:00:00 |
| Total | 0 | 30 | 30 | 0 | 4 | 00:00:00 |
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Phase 2.4.2 Physical Synthesis In Placer | Checksum: 13fd60444
Time (s): cpu = 00:00:15 ; elapsed = 00:00:05 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8752 ; free virtual = 27520
Phase 2.4 Global Placement Core | Checksum: 1bcc20026
Time (s): cpu = 00:00:19 ; elapsed = 00:00:05 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8756 ; free virtual = 27524
Phase 2 Global Placement | Checksum: 1bcc20026
Time (s): cpu = 00:00:19 ; elapsed = 00:00:05 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8756 ; free virtual = 27524
Phase 3 Detail Placement
Phase 3.1 Commit Multi Column Macros
Phase 3.1 Commit Multi Column Macros | Checksum: 1f7ed1fb5
Time (s): cpu = 00:00:19 ; elapsed = 00:00:06 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8754 ; free virtual = 27522
Phase 3.2 Commit Most Macros & LUTRAMs
Phase 3.2 Commit Most Macros & LUTRAMs | Checksum: 1c5aed417
Time (s): cpu = 00:00:20 ; elapsed = 00:00:06 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8756 ; free virtual = 27524
Phase 3.3 Area Swap Optimization
Phase 3.3 Area Swap Optimization | Checksum: 165831a1b
Time (s): cpu = 00:00:20 ; elapsed = 00:00:06 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8756 ; free virtual = 27524
Phase 3.4 Pipeline Register Optimization
Phase 3.4 Pipeline Register Optimization | Checksum: 1dffa75f1
Time (s): cpu = 00:00:20 ; elapsed = 00:00:06 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8756 ; free virtual = 27524
Phase 3.5 Small Shape Detail Placement
Phase 3.5 Small Shape Detail Placement | Checksum: 2495072c8
Time (s): cpu = 00:00:21 ; elapsed = 00:00:07 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8752 ; free virtual = 27529
Phase 3.6 Re-assign LUT pins
Phase 3.6 Re-assign LUT pins | Checksum: 2500b3b7c
Time (s): cpu = 00:00:22 ; elapsed = 00:00:07 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8752 ; free virtual = 27529
Phase 3.7 Pipeline Register Optimization
Phase 3.7 Pipeline Register Optimization | Checksum: 1a2761762
Time (s): cpu = 00:00:22 ; elapsed = 00:00:07 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8752 ; free virtual = 27529
Phase 3 Detail Placement | Checksum: 1a2761762
Time (s): cpu = 00:00:22 ; elapsed = 00:00:07 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8752 ; free virtual = 27529
Phase 4 Post Placement Optimization and Clean-Up
Phase 4.1 Post Commit Optimization
INFO: [Timing 38-35] Done setting XDC timing constraints.
Phase 4.1.1 Post Placement Optimization
Post Placement Optimization Initialization | Checksum: 1d05202b8
Phase 4.1.1.1 BUFG Insertion
Starting Physical Synthesis Task
Phase 1 Physical Synthesis Initialization
INFO: [Physopt 32-721] Multithreading enabled for phys_opt_design using a maximum of 8 CPUs
INFO: [Physopt 32-619] Estimated Timing Summary | WNS=9.081 | TNS=0.000 |
Phase 1 Physical Synthesis Initialization | Checksum: 1824db9b8
Time (s): cpu = 00:00:00.23 ; elapsed = 00:00:00.09 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8758 ; free virtual = 27534
INFO: [Place 46-56] BUFG insertion identified 0 candidate nets. Inserted BUFG: 0, Replicated BUFG Driver: 0, Skipped due to Placement/Routing Conflicts: 0, Skipped due to Timing Degradation: 0, Skipped due to netlist editing failed: 0.
Ending Physical Synthesis Task | Checksum: 1824db9b8
Time (s): cpu = 00:00:00.28 ; elapsed = 00:00:00.14 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8758 ; free virtual = 27534
Phase 4.1.1.1 BUFG Insertion | Checksum: 1d05202b8
Time (s): cpu = 00:00:25 ; elapsed = 00:00:08 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8758 ; free virtual = 27534
Phase 4.1.1.2 Post Placement Timing Optimization
INFO: [Place 30-746] Post Placement Timing Summary WNS=9.081. For the most accurate timing information please run report_timing.
Phase 4.1.1.2 Post Placement Timing Optimization | Checksum: 1d27eca9b
Time (s): cpu = 00:00:25 ; elapsed = 00:00:08 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8758 ; free virtual = 27534
Time (s): cpu = 00:00:25 ; elapsed = 00:00:08 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8758 ; free virtual = 27534
Phase 4.1 Post Commit Optimization | Checksum: 1d27eca9b
Time (s): cpu = 00:00:25 ; elapsed = 00:00:08 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8758 ; free virtual = 27534
Phase 4.2 Post Placement Cleanup
Phase 4.2 Post Placement Cleanup | Checksum: 1d27eca9b
Time (s): cpu = 00:00:25 ; elapsed = 00:00:09 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8758 ; free virtual = 27534
Phase 4.3 Placer Reporting
Phase 4.3.1 Print Estimated Congestion
INFO: [Place 30-612] Post-Placement Estimated Congestion
____________________________________________________
| | Global Congestion | Short Congestion |
| Direction | Region Size | Region Size |
|___________|___________________|___________________|
| North| 1x1| 4x4|
|___________|___________________|___________________|
| South| 1x1| 1x1|
|___________|___________________|___________________|
| East| 1x1| 1x1|
|___________|___________________|___________________|
| West| 1x1| 1x1|
|___________|___________________|___________________|
Phase 4.3.1 Print Estimated Congestion | Checksum: 1d27eca9b
Time (s): cpu = 00:00:25 ; elapsed = 00:00:09 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8758 ; free virtual = 27534
Phase 4.3 Placer Reporting | Checksum: 1d27eca9b
Time (s): cpu = 00:00:25 ; elapsed = 00:00:09 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8758 ; free virtual = 27534
Phase 4.4 Final Placement Cleanup
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8758 ; free virtual = 27534
Time (s): cpu = 00:00:25 ; elapsed = 00:00:09 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8758 ; free virtual = 27534
Phase 4 Post Placement Optimization and Clean-Up | Checksum: 172aa4118
Time (s): cpu = 00:00:25 ; elapsed = 00:00:09 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8758 ; free virtual = 27534
Ending Placer Task | Checksum: dd0ed08b
Time (s): cpu = 00:00:25 ; elapsed = 00:00:09 . Memory (MB): peak = 2888.586 ; gain = 7.027 ; free physical = 8758 ; free virtual = 27534
29 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered.
place_design completed successfully
place_design: Time (s): cpu = 00:00:27 ; elapsed = 00:00:09 . Memory (MB): peak = 2888.586 ; gain = 39.043 ; free physical = 8758 ; free virtual = 27534
# report_utilization -hierarchical -file digilent_nexys4ddr_utilization_hierarchical_place.rpt
# report_utilization -file digilent_nexys4ddr_utilization_place.rpt
# report_io -file digilent_nexys4ddr_io.rpt
report_io: Time (s): cpu = 00:00:00.12 ; elapsed = 00:00:00.15 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8750 ; free virtual = 27527
# report_control_sets -verbose -file digilent_nexys4ddr_control_sets.rpt
report_control_sets: Time (s): cpu = 00:00:00.03 ; elapsed = 00:00:00.09 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8746 ; free virtual = 27524
# report_clock_utilization -file digilent_nexys4ddr_clock_utilization.rpt
# route_design
Command: route_design
Attempting to get a license for feature 'Implementation' and/or device 'xc7a100t'
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7a100t'
Running DRC as a precondition to command route_design
INFO: [DRC 23-27] Running DRC with 8 threads
INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors
INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information.
Starting Routing Task
INFO: [Route 35-254] Multithreading enabled for route_design using a maximum of 8 CPUs
Phase 1 Build RT Design
Checksum: PlaceDB: a88f9ee7 ConstDB: 0 ShapeSum: 347f31a4 RouteDB: 0
Post Restoration Checksum: NetGraph: 6e34220a | NumContArr: 4c668841 | Constraints: c2a8fa9d | Timing: c2a8fa9d
Phase 1 Build RT Design | Checksum: 23fec9f85
Time (s): cpu = 00:00:32 ; elapsed = 00:00:26 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 9046 ; free virtual = 27835
Phase 2 Router Initialization
Phase 2.1 Fix Topology Constraints
Phase 2.1 Fix Topology Constraints | Checksum: 23fec9f85
Time (s): cpu = 00:00:32 ; elapsed = 00:00:26 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 9046 ; free virtual = 27835
Phase 2.2 Pre Route Cleanup
Phase 2.2 Pre Route Cleanup | Checksum: 23fec9f85
Time (s): cpu = 00:00:32 ; elapsed = 00:00:26 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 9046 ; free virtual = 27835
Number of Nodes with overlaps = 0
Phase 2.3 Update Timing
Phase 2.3 Update Timing | Checksum: 3269063f7
Time (s): cpu = 00:00:37 ; elapsed = 00:00:28 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 9011 ; free virtual = 27800
INFO: [Route 35-416] Intermediate Timing Summary | WNS=8.996 | TNS=0.000 | WHS=-0.066 | THS=-0.066 |
Router Utilization Summary
Global Vertical Routing Utilization = 0.00047874 %
Global Horizontal Routing Utilization = 0.0004973 %
Routable Net Status*
*Does not include unroutable nets such as driverless and loadless.
Run report_route_status for detailed report.
Number of Failed Nets = 3858
(Failed Nets is the sum of unrouted and partially routed nets)
Number of Unrouted Nets = 3854
Number of Partially Routed Nets = 4
Number of Node Overlaps = 2
Phase 2 Router Initialization | Checksum: 276001bf3
Time (s): cpu = 00:00:39 ; elapsed = 00:00:28 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 9012 ; free virtual = 27801
Phase 3 Initial Routing
Phase 3.1 Global Routing
Phase 3.1 Global Routing | Checksum: 276001bf3
Time (s): cpu = 00:00:39 ; elapsed = 00:00:28 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 9012 ; free virtual = 27801
Phase 3.2 Initial Net Routing
Phase 3.2 Initial Net Routing | Checksum: 1e209afe4
Time (s): cpu = 00:00:40 ; elapsed = 00:00:29 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 9012 ; free virtual = 27801
Phase 3 Initial Routing | Checksum: 1e209afe4
Time (s): cpu = 00:00:40 ; elapsed = 00:00:29 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 9012 ; free virtual = 27801
Phase 4 Rip-up And Reroute
Phase 4.1 Global Iteration 0
Number of Nodes with overlaps = 581
Number of Nodes with overlaps = 3
Number of Nodes with overlaps = 0
INFO: [Route 35-416] Intermediate Timing Summary | WNS=8.788 | TNS=0.000 | WHS=N/A | THS=N/A |
Phase 4.1 Global Iteration 0 | Checksum: 20fe18fd8
Time (s): cpu = 00:00:44 ; elapsed = 00:00:30 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 9000 ; free virtual = 27790
Phase 4 Rip-up And Reroute | Checksum: 20fe18fd8
Time (s): cpu = 00:00:44 ; elapsed = 00:00:30 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 9000 ; free virtual = 27790
Phase 5 Delay and Skew Optimization
Phase 5.1 Delay CleanUp
Phase 5.1 Delay CleanUp | Checksum: 20fe18fd8
Time (s): cpu = 00:00:44 ; elapsed = 00:00:30 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 9000 ; free virtual = 27790
Phase 5.2 Clock Skew Optimization
Phase 5.2 Clock Skew Optimization | Checksum: 20fe18fd8
Time (s): cpu = 00:00:44 ; elapsed = 00:00:30 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 9000 ; free virtual = 27790
Phase 5 Delay and Skew Optimization | Checksum: 20fe18fd8
Time (s): cpu = 00:00:44 ; elapsed = 00:00:30 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 9000 ; free virtual = 27790
Phase 6 Post Hold Fix
Phase 6.1 Hold Fix Iter
Phase 6.1.1 Update Timing
Phase 6.1.1 Update Timing | Checksum: 28643b874
Time (s): cpu = 00:00:44 ; elapsed = 00:00:30 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8999 ; free virtual = 27790
INFO: [Route 35-416] Intermediate Timing Summary | WNS=8.884 | TNS=0.000 | WHS=0.247 | THS=0.000 |
Phase 6.1 Hold Fix Iter | Checksum: 28643b874
Time (s): cpu = 00:00:44 ; elapsed = 00:00:30 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8999 ; free virtual = 27790
Phase 6 Post Hold Fix | Checksum: 28643b874
Time (s): cpu = 00:00:44 ; elapsed = 00:00:30 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8999 ; free virtual = 27789
Phase 7 Route finalize
Router Utilization Summary
Global Vertical Routing Utilization = 0.769117 %
Global Horizontal Routing Utilization = 0.951904 %
Routable Net Status*
*Does not include unroutable nets such as driverless and loadless.
Run report_route_status for detailed report.
Number of Failed Nets = 0
(Failed Nets is the sum of unrouted and partially routed nets)
Number of Unrouted Nets = 0
Number of Partially Routed Nets = 0
Number of Node Overlaps = 0
Phase 7 Route finalize | Checksum: 28643b874
Time (s): cpu = 00:00:44 ; elapsed = 00:00:30 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8998 ; free virtual = 27788
Phase 8 Verifying routed nets
Verification completed successfully
Phase 8 Verifying routed nets | Checksum: 28643b874
Time (s): cpu = 00:00:44 ; elapsed = 00:00:30 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8996 ; free virtual = 27786
Phase 9 Depositing Routes
Phase 9 Depositing Routes | Checksum: 2bb4935b9
Time (s): cpu = 00:00:45 ; elapsed = 00:00:31 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8999 ; free virtual = 27789
Phase 10 Post Router Timing
INFO: [Route 35-57] Estimated Timing Summary | WNS=8.884 | TNS=0.000 | WHS=0.247 | THS=0.000 |
INFO: [Route 35-327] The final timing numbers are based on the router estimated timing analysis. For a complete and accurate timing signoff, please run report_timing_summary.
Phase 10 Post Router Timing | Checksum: 2bb4935b9
Time (s): cpu = 00:00:45 ; elapsed = 00:00:31 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8999 ; free virtual = 27789
INFO: [Route 35-16] Router Completed Successfully
Phase 11 Post-Route Event Processing
Phase 11 Post-Route Event Processing | Checksum: 19ff923a6
Time (s): cpu = 00:00:45 ; elapsed = 00:00:31 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8998 ; free virtual = 27788
Ending Routing Task | Checksum: 19ff923a6
Time (s): cpu = 00:00:45 ; elapsed = 00:00:31 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8997 ; free virtual = 27788
Routing Is Done.
INFO: [Common 17-83] Releasing license: Implementation
12 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered.
route_design completed successfully
route_design: Time (s): cpu = 00:00:47 ; elapsed = 00:00:32 . Memory (MB): peak = 2888.586 ; gain = 0.000 ; free physical = 8997 ; free virtual = 27788
# report_timing_summary -no_header -no_detailed_paths
INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -1, Delay Type: min_max.
INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 8 CPUs
------------------------------------------------------------------------------------------------
| Timer Settings
| --------------
------------------------------------------------------------------------------------------------
Enable Multi Corner Analysis : Yes
Enable Pessimism Removal : Yes
Pessimism Removal Resolution : Nearest Common Node
Enable Input Delay Default Clock : No
Enable Preset / Clear Arcs : No
Disable Flight Delays : No
Ignore I/O Paths : No
Timing Early Launch at Borrowing Latches : No
Borrow Time for Max Delay Exceptions : Yes
Merge Timing Exceptions : Yes
Inter-SLR Compensation : Conservative
Corner Analyze Analyze
Name Max Paths Min Paths
------ --------- ---------
Slow Yes Yes
Fast Yes Yes
------------------------------------------------------------------------------------------------
| Report Methodology
| ------------------
------------------------------------------------------------------------------------------------
No report available as report_methodology has not been run prior. Run report_methodology on the current design for the summary of methodology violations.
check_timing report
Table of Contents
-----------------
1. checking no_clock (2258)
2. checking constant_clock (0)
3. checking pulse_width_clock (0)
4. checking unconstrained_internal_endpoints (7344)
5. checking no_input_delay (10)
6. checking no_output_delay (17)
7. checking multiple_clock (0)
8. checking generated_clocks (0)
9. checking loops (0)
10. checking partial_input_delay (0)
11. checking partial_output_delay (0)
12. checking latch_loops (0)
1. checking no_clock (2258)
---------------------------
There are 4 register/latch pins with no clock driven by root clock pin: SOC/Core/Control_Unit/FSM_onehot_state_reg[37]/Q (HIGH)
There are 4 register/latch pins with no clock driven by root clock pin: SOC/Core/Control_Unit/FSM_onehot_state_reg[38]/Q (HIGH)
There are 4 register/latch pins with no clock driven by root clock pin: SOC/Core/Control_Unit/FSM_onehot_state_reg[40]/Q (HIGH)
There are 2246 register/latch pins with no clock driven by root clock pin: clk_o_reg/Q (HIGH)
2. checking constant_clock (0)
------------------------------
There are 0 register/latch pins with constant_clock.
3. checking pulse_width_clock (0)
---------------------------------
There are 0 register/latch pins which need pulse_width check
4. checking unconstrained_internal_endpoints (7344)
---------------------------------------------------
There are 7344 pins that are not constrained for maximum delay. (HIGH)
There are 0 pins that are not constrained for maximum delay due to constant clock.
5. checking no_input_delay (10)
-------------------------------
There are 10 input ports with no input delay specified. (HIGH)
There are 0 input ports with no input delay but user has a false path constraint.
6. checking no_output_delay (17)
--------------------------------
There are 17 ports with no output delay specified. (HIGH)
There are 0 ports with no output delay but user has a false path constraint
There are 0 ports with no output delay but with a timing clock defined on it or propagating through it
7. checking multiple_clock (0)
------------------------------
There are 0 register/latch pins with multiple clocks.
8. checking generated_clocks (0)
--------------------------------
There are 0 generated clocks that are not connected to a clock source.
9. checking loops (0)
---------------------
There are 0 combinational loops in the design.
10. checking partial_input_delay (0)
------------------------------------
There are 0 input ports with partial input delay specified.
11. checking partial_output_delay (0)
-------------------------------------
There are 0 ports with partial output delay specified.
12. checking latch_loops (0)
----------------------------
There are 0 combinational latch loops in the design through latch input
------------------------------------------------------------------------------------------------
| Design Timing Summary
| ---------------------
------------------------------------------------------------------------------------------------
WNS(ns) TNS(ns) TNS Failing Endpoints TNS Total Endpoints WHS(ns) THS(ns) THS Failing Endpoints THS Total Endpoints WPWS(ns) TPWS(ns) TPWS Failing Endpoints TPWS Total Endpoints
------- ------- --------------------- ------------------- ------- ------- --------------------- ------------------- -------- -------- ---------------------- --------------------
8.908 0.000 0 1 0.263 0.000 0 1 4.500 0.000 0 3
All user specified timing constraints are met.
------------------------------------------------------------------------------------------------
| Clock Summary
| -------------
------------------------------------------------------------------------------------------------
Clock Waveform(ns) Period(ns) Frequency(MHz)
----- ------------ ---------- --------------
sys_clk_pin {0.000 5.000} 10.000 100.000
------------------------------------------------------------------------------------------------
| Intra Clock Table
| -----------------
------------------------------------------------------------------------------------------------
Clock WNS(ns) TNS(ns) TNS Failing Endpoints TNS Total Endpoints WHS(ns) THS(ns) THS Failing Endpoints THS Total Endpoints WPWS(ns) TPWS(ns) TPWS Failing Endpoints TPWS Total Endpoints
----- ------- ------- --------------------- ------------------- ------- ------- --------------------- ------------------- -------- -------- ---------------------- --------------------
sys_clk_pin 8.908 0.000 0 1 0.263 0.000 0 1 4.500 0.000 0 3
------------------------------------------------------------------------------------------------
| Inter Clock Table
| -----------------
------------------------------------------------------------------------------------------------
From Clock To Clock WNS(ns) TNS(ns) TNS Failing Endpoints TNS Total Endpoints WHS(ns) THS(ns) THS Failing Endpoints THS Total Endpoints
---------- -------- ------- ------- --------------------- ------------------- ------- ------- --------------------- -------------------
------------------------------------------------------------------------------------------------
| Other Path Groups Table
| -----------------------
------------------------------------------------------------------------------------------------
Path Group From Clock To Clock WNS(ns) TNS(ns) TNS Failing Endpoints TNS Total Endpoints WHS(ns) THS(ns) THS Failing Endpoints THS Total Endpoints
---------- ---------- -------- ------- ------- --------------------- ------------------- ------- ------- --------------------- -------------------
# report_route_status -file digilent_nexys4ddr_route_status.rpt
# report_drc -file digilent_nexys4ddr_drc.rpt
Command: report_drc -file digilent_nexys4ddr_drc.rpt
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1704] No user IP repositories specified
INFO: [IP_Flow 19-2313] Loaded Vivado IP repository '/eda/vivado/Vivado/2023.2/data/ip'.
INFO: [DRC 23-27] Running DRC with 8 threads
INFO: [Vivado_Tcl 2-168] The results of DRC are in file /var/lib/jenkins/workspace/Risco_5/Risco-5/fpga/nexys4_ddr/digilent_nexys4ddr_drc.rpt.
report_drc completed successfully
# report_timing_summary -datasheet -max_paths 10 -file digilent_nexys4ddr_timing.rpt
INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -1, Delay Type: min_max.
INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 8 CPUs
# report_power -file digilent_nexys4ddr_power.rpt
Command: report_power -file digilent_nexys4ddr_power.rpt
Running Vector-less Activity Propagation...
Finished Running Vector-less Activity Propagation
WARNING: [Power 33-332] Found switching activity that implies high-fanout reset nets being asserted for excessive periods of time which may result in inaccurate power analysis.
Resolution: To review and fix problems, please run Power Constraints Advisor in the GUI from Tools > Power Constraints Advisor or run report_power with the -advisory option to generate a text report.
0 Infos, 1 Warnings, 0 Critical Warnings and 0 Errors encountered.
report_power completed successfully
# write_bitstream -force "./build/out.bit"
Command: write_bitstream -force ./build/out.bit
Attempting to get a license for feature 'Implementation' and/or device 'xc7a100t'
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7a100t'
Running DRC as a precondition to command write_bitstream
INFO: [IP_Flow 19-1839] IP Catalog is up to date.
INFO: [DRC 23-27] Running DRC with 8 threads
WARNING: [DRC CFGBVS-1] Missing CFGBVS and CONFIG_VOLTAGE Design Properties: Neither the CFGBVS nor CONFIG_VOLTAGE voltage property is set in the current_design. Configuration bank voltage select (CFGBVS) must be set to VCCO or GND, and CONFIG_VOLTAGE must be set to the correct configuration voltage, in order to determine the I/O voltage support for the pins in bank 0. It is suggested to specify these either using the 'Edit Device Properties' function in the GUI or directly in the XDC file using the following syntax:
set_property CFGBVS value1 [current_design]
#where value1 is either VCCO or GND
set_property CONFIG_VOLTAGE value2 [current_design]
#where value2 is the voltage provided to configuration bank 0
Refer to the device configuration user guide for more information.
WARNING: [DRC PDRC-153] Gated clock check: Net SOC/Core/Control_Unit/FSM_onehot_state_reg[40]_1[0] is a gated clock net sourced by a combinational pin SOC/Core/Control_Unit/aluop_out_reg[3]_i_2/O, cell SOC/Core/Control_Unit/aluop_out_reg[3]_i_2. This is not good design practice and will likely impact performance. For SLICE registers, for example, use the CE pin to control the loading of data.
INFO: [Vivado 12-3199] DRC finished with 0 Errors, 2 Warnings
INFO: [Vivado 12-3200] Please refer to the DRC report (report_drc) for more information.
INFO: [Designutils 20-2272] Running write_bitstream with 8 threads.
Loading data files...
Loading site data...
Loading route data...
Processing options...
Creating bitmap...
Creating bitstream...
Writing bitstream ./build/out.bit...
INFO: [Vivado 12-1842] Bitgen Completed Successfully.
INFO: [Project 1-1876] WebTalk data collection is mandatory when using a ULT device. To see the specific WebTalk data collected for your design, open the usage_statistics_webtalk.html or usage_statistics_webtalk.xml file in the implementation directory.
INFO: [Common 17-83] Releasing license: Implementation
9 Infos, 2 Warnings, 0 Critical Warnings and 0 Errors encountered.
write_bitstream completed successfully
write_bitstream: Time (s): cpu = 00:00:16 ; elapsed = 00:00:19 . Memory (MB): peak = 3204.602 ; gain = 248.145 ; free physical = 8609 ; free virtual = 27450
INFO: [Common 17-206] Exiting Vivado at Tue Jun 18 02:08:25 2024...
![[Jenkins]](/jenkins/static/b6fe011e/images/svgs/logo.svg){kind=logo}
